Top 10 Solar Charge Controller LiFePO4 – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. ExpertPower

#ad

ExpertPower 30A PWM Solar Charge Controller for LifePO4 Battery | 12V / 24V Auto-Select Intelligent Regulator | Max PV Input 55V | USB Charge | Backlight LCD Display

#ad
ExpertPower #ad - Smart tech: the controller automatically regulates charging profiles relative to ambient temperatures, over-discharge, overload, providing the best level of charge in any condition and protecting against over-charge, and short circuit.

Premium quality: the controller is built on an industrial-grade chassis, able to withstand all sorts of abuse in harsh conditions. Digital display: the unit offers an ease-of-access screen interface, displaying data ranging from state of charge to battery health. Expertpower: all expertpower charge controllers operate at their full potential with an ExpertPower LiFePO4 battery and solar panel as the controllers are preset for LiFePO4. System detect: the 30a pwm controller automatically recognizes 12V and 24V systems for quick setup and programmed to maximize LiFePO4 Battery’s life through a meticulous CC-CV charging algorithm.
BrandExpertPower #ad
ManufacturerExpertPower #ad
Height1.75 Inches
Length6.5 Inches
Width4 Inches
ModelEPSHP2430Li

2. HUINE

#ad

HUINE Parameter Adjustable 12V 24V Lithium ion Lifepo4 PWM Solar Charge Controller 30A Battery Controller Regulator with LCD Digital Display Dual 5V USB

#ad
HUINE #ad - Can charge 3 types of batteries: lead acid batteries including flooded, AGM, Sealed, GEL, 3S/6S Lithium ion batteries and 4S/8S LiFepo4 batteries. Default battery type is for lead acid battery, customers need to set for other battery type.

Build-in industrial micro PWM solar controller, the voltages and working modes of loads can be adjustable. With multi-functional lcd display, it dynamically displays all the operating data and working condition, working modes, and parameter configuration can switched conveniently by pressing 3 yellow buttons. Have 3 kinds of load working mode for your choice: 24hours load on mode, Dawn to Dark mode, and Timer mode based on D2D.

With 2pcs 5v/2a max usb output and deep heat sink, rv, solar home power station, outdoor solar monitoring, you can apply this solar charge regulator to many solar systems, such as solar street lighting, Camper, Boat or Caravan solar systems or other solar systems. Default load working mode is 24 hours.
BrandHUINE #ad
ManufacturerHUINE #ad
Weight0.82 Pounds

3. SOLAR MPPT

#ad

100Amp MPPT Solar Controller 100V Input, LiFePO4 Lead-Acid AGM, Solar Panel Maximum Input 1300W / 2600W 12V / 24V Automatic K100A, Dedicated for RV/Yacht/Solar Power Generation System

#ad
SOLAR MPPT #ad - Mppt charge and discharge solar controller; 100Amp;. Prevention: overcharge, reverse polarity, overdischarge, overheat, overload, lightning strike and other protection functions;. Lcd display automatically switch to display more parameter information;. Battery type: lifepo4, AGM is compatible with more battery charging;. If you have any questions before installation, please email us; we will answer as soon as possible; the professional technical team will guide the installation; worry-free after-sales guarantee. The solar controller is a professional product.
BrandSOLAR MPPT #ad
ManufacturerOOYCYOO #ad

4. PowMr

#ad

12V Charge Controller,Solar Charge Controller. Charge Controller,Solar Regulator Charge Controller 30A 12/24V for li Lead-Acid Battery, PowMr Solar Charge Controller 12V

#ad
PowMr #ad - 30a intelligent 4-stage pwm charge controller with 4096 resolution ratio technology's 32bit microprocessor, The data collected will be more accurate. Usb port design will give your electronic equipment 5V 1A.

More safe design & upgraded heat dissipation:Aluminum platen base, Bigger circult board, better circuit configuration and the lithium battery fuse can make your solar system more safe. This 30a solar charge controller design human-machine interface with adjustable charging parameters, Such as Over-Charge voltage/LVR/LVD/Floate voltage/Working mode, Energy Statistics. Which makes operation on the interface rather convenient.

Like the second picture. This easy install and come with detail english manual. 12v/24v system auto, 8 battery type compatible –lithium-ion, car, agm, lifepo4, old, gel, flooded and Calcium. With complete circuit protection and Temperature Compensation Function to prolong your battery life. If you plan to change battery from Lead acid battery to Lithium. This will be a good choice for you.
BrandPowMr #ad
ManufacturerPowMr #ad

5. HUINETUL

#ad

HUINETUL 12V 24V 20A IP68 Waterproof Solar Charge Controller Lithium ion Lifepo4 Lead-Acid Battery Regulator with IR Remote Controller

#ad
HUINETUL #ad - With ir remote control, dust to dawn working mode, it has 24hr working mode, the remote distance is about 4M to 5M, and you also can set the working hours for load based on dust to dawn working mode, offer several working mode for your choice, then can meets your specific using demand.

Default battery type is for lead acid. Ip68 waterproof grade, made with premium aluminum alloy shell, it can be used for outdoor solar system, with cables/heat sink/4pcs mounting holes. Can fits for 3 types of batteries, you can use it to charge 3S/6S lithium ion battery, 4S/8S lifepo4 battery and all kinds of lead acid batteries. Flooded sealed, AGM or GEL. After you choose battery type by remote control, with power-off memory function.

Can be used for both 12v and 24v solar system, the voltage will changes to match your connected battery like11. 1v/12. 8v/22. 2v/25. 6v, it can senses if it’s 12V or 24V automatically after activated by enough voltage battery. With 4pcs led lights to help you know the working status of the controller, has all the necessary protection: short circuit protection, reverse protection, over charging protection and over load protection. Fully 4-stage PWM charge management.
BrandHUINETUL #ad
ManufacturerHUINE #ad
Weight0.3 Pounds

6. Powerwerx

#ad

Powerwerx MPPT-150-14.6, DC-to-DC Solar Charger Controller for Bioenno 12V LiFePO4 Batteries

#ad
Powerwerx #ad - Rated at 12 Amps maximum. This controller should not be used with Flooded, AGM or GEL type batteries as it will overcharge them. Rated at 150 watts, the mppt-150-14. 6 solar controller is designed for charging Bioenno 12V type LifePO4 batteries. Input dc range from 16-25 vdc. Output is a constant 14. 6 vdc. Smart charge controller design will automatically adjust charging output as required by batteries, no user adjustment needed. Note: this solar controller is intended for used with Bioenno LiFePO4 or equivalent batteries.
BrandPowerwerx #ad
ManufacturerPowerwerx #ad
Height2 Inches
Length4 Inches
Weight0.3 Pounds
Width4 Inches
Part NumberMPPT-150-14.6
ModelMPPT-150-14.6

7. Bioenno Power

#ad

Bioenno Power 12V/24V, 20A Universal Solar Charge Controller for LFP LiFePO4 Lithium Iron Phosphate Batteries SC-122420JUD

#ad
Bioenno Power #ad - Voltage range: 12V to 50V. Fully automatic, can be set for any battery type 12V or 24V, universal compatibility, features LCD Display. X 3. 46 in. X 1. 5 in. 166 mm x 88 mm x 38 mm. Maximum current: 20a/dimensions: 6. 5 in. Charge mode: Depends on chemistry of battery. For 12v/24v batteries, no chemistry restrictions.
BrandBioenno Power #ad
ManufacturerBioenno Power #ad
Weight0.65 Pounds
Part NumberSC-122420JUD
ModelSC-122420JUD

8. SolarEpic

#ad

EPEVER 40A MPPT Solar Charge Controller 100V PV Max Input Negative Ground LiFePo4 Battery Charger W/ MT50 Remote Meter & Temperature Sensor Tracer4210AN

#ad
SolarEpic #ad - 100v max pv input allow you connect 4 x12v solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss. Compatible with lifepo4 & linicomno2 batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.

Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels or Even Higher Voltage Charging 12v/24v Battery. Standard modbus communication protocol with RS485 interface, it can be monitored by cellphone APPeBox required, PC Software and MT50 remote meter. Negative grounding design and advanced mpPT control algorithm make it charging efficiency no less than 99. 5%, it maximize the charging power as a way of saving the energy.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Height2.48 Inches
Length9.92 Inches
Weight5.38 Pounds
Width7.09 Inches
Model4210AN50RTS
Warranty3 Years Warranty

9. Genasun

#ad

Genasun GV-10-Li-14.2V, 10.5 A MPPT Charge Controller for Lithium 4S LiFePO4 battery

#ad
Genasun #ad - Advanced electronic protections for reverse panel and battery polarity. 98. 3% peak efficiency and tiny night consumption 09 mA. Max. Recommended panel power 140 w, 105 a charging current, charge profile CC/CV at 14. 2 v for 4s lifePO4 3. 55 v per cell. 5-year warranty, fcc, class 1 div. 2, certified cetlus, conform to CE, Made in the USA, RoHS. High-speed mppt, speed tracking 15 Hz 15 times per sec.
BrandGenasun #ad
ManufacturerGenasun #ad
Weight0.41 Pounds
Part NumberGV-10-Li-14.2V

10. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Smart 4-stage pwm charging bulk, boost, and equalization increases battery life and improves system performance. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Intelligent protection against reverse polarity, Float, overcharging, short-circuit, and reverse current.

Compact in size makes it easy to install virtually anywhere. Integrated 5v 2a usb ports to charge USB devices. Backlit lcd screen displays system operation, diverse load control, and error codes. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Then secure each cable by rotating the screws clockwise CW to the closed position. Capable of charging over-discharged lithium batteries.

Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Power source Type: Solar-Powered. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Weight0.27 Pounds
Width3 Inches
Part NumberWanderer 10A
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty